oldskoolte72's ae72

oldskoolte86 · **Posted:** Tue Oct 04, 2011 7:42 pm

whats up jnc this is what ive bin working on

kingtoy · **Posted:** Wed Oct 05, 2011 7:29 am

Very sweet car, I love the bumpers. I have a set just like them on my sport coupe. I will say though that it is not a TE86, it seems like a TE71.

oldskoolte86 · **Posted:** Wed Oct 05, 2011 9:14 am

na its a te72 with a 80 front . i call it a te86 bc it has a full ae86 twin cam swap motor trans/suspension/dash/and rear . the bumper were a bitch to make fit but i got them on and st8 there's a lot of fabactration that has to be done in order to make them fit right :tu:

kingtoy · **Posted:** Thu Oct 06, 2011 7:08 am

Well my front bumper bolt up pretty easily. I was able to use two of the original mounting holes. I just have to drill two new ones to finish. The rear I haven't tried yet cause I know it will take some fabing up.

oldskoolte86 · **Posted:** Fri Oct 07, 2011 7:10 am

yea your bumpers are easy bc they are for your car to fit my car i had to start from srcatch i had to work themetal front fenders and rear quarters so they fit st8. i dont know if your looking but i have the original bumper brackets for your car to fit thoese bumpers lmk

kingtoy · **Posted:** Fri Oct 07, 2011 7:47 am

oldskoolte86 wrote:

yea your bumpers are easy bc they are for your car to fit my car i had to start from srcatch i had to work themetal front fenders and rear quarters so they fit st8. i dont know if your looking but i have the original bumper brackets for your car to fit thoese bumpers lmk

You mean brackets for the rear?

McE70coupe · **Posted:** Wed Oct 12, 2011 9:30 am

I have have been trying to find those front bumpers for my 81 corolla do you know where I could pick up a set preferably close to Philly/Camden area?

oldskoolte86 · **Posted:** Wed Oct 12, 2011 4:57 pm

kingtoy wrote:

oldskoolte86 wrote:

yea your bumpers are easy bc they are for your car to fit my car i had to start from srcatch i had to work themetal front fenders and rear quarters so they fit st8. i dont know if your looking but i have the original bumper brackets for your car to fit thoese bumpers lmk

You mean brackets for the rear?

yes but they are the jdm ones i also have the front ones lmk

oldskoolte86 · **Posted:** Wed Oct 12, 2011 4:58 pm

McE70coupe wrote:

I have have been trying to find those front bumpers for my 81 corolla do you know where I could pick up a set preferably close to Philly/Camden area?

i got mine from japan after looking for 8 years good luck

McE70coupe · **Posted:** Thu Oct 13, 2011 5:02 am

oldskoolte86 wrote:

McE70coupe wrote:

I have have been trying to find those front bumpers for my 81 corolla do you know where I could pick up a set preferably close to Philly/Camden area?

i got mine from japan after looking for 8 years good luck

Went to the junkyard yesterday found an old gremlin measured the bumpers they'll fit might need a Lil custom fabrication but looks promising

lmp5/luis · **Posted:** Thu Oct 13, 2011 4:38 pm

love the lip man the car look very nice keep it up im from puerto rico to isabela nice knowing that boricuas representing :tu:

oldskoolte86 · **Posted:** Sun Nov 27, 2011 11:00 am

new pics @ the gas station today

oldskoolte86 · **Posted:** Thu Dec 08, 2011 2:52 pm

i blew my motor toady =( racing a fag gsr honda at least i won thanks to the trd close ratio trans just in time for winter its ok i got something up my sleeve :twisted:

but wait look what i got
fresh motor

BuzzBomber · **Posted:** Thu Dec 08, 2011 3:15 pm

oldskoolte86 wrote:

na its a te72 with a 80 front . i call it a te86 bc it has a full ae86 twin cam swap motor trans/suspension/dash/and rear .

then it should be an ae72. a is your engine code since its no longer a t series e is frame code which hasnt changed 72 is the body since its still the same body just with a front fascia swap
i did the same thing with my ra65c. it had a 3tgte swap and everything so it almost justified it a gttr but it had flares and IRS so i just called it a ta65

rickiewedge · **Posted:** Thu Dec 08, 2011 4:12 pm

like the chin.very nice

oldskoolte86 · **Posted:** Sat Dec 10, 2011 5:56 pm

polished water pump and upper water neck

completely shaved intake in the process of polishing it up

oldskoolte86 · **Posted:** Mon Dec 12, 2011 5:11 pm

look what oldskool got

oldskoolte86 · **Posted:** Mon Dec 12, 2011 5:19 pm

BuzzBomber wrote:

oldskoolte86 wrote:

na its a te72 with a 80 front . i call it a te86 bc it has a full ae86 twin cam swap motor trans/suspension/dash/and rear .

then it should be an ae72. a is your engine code since its no longer a t series e is frame code which hasnt changed 72 is the body since its still the same body just with a front fascia swap
i did the same thing with my ra65c. it had a 3tgte swap and everything so it almost justified it a gttr but it had flares and IRS so i just called it a ta65

i really never put that much thought into it but thanks for clearing it up

Crash1976 · **Posted:** Tue Dec 13, 2011 9:12 am

you will love the GZE compared to the NA version. My GZE swapped MR2 was a screamer stock. drop in some cams and a supercharger pulley and it will fly.

toyminator · **Posted:** Tue Dec 13, 2011 3:04 pm

Your ride is looking sweet! I remember shaving my grs intake in my
83 and it was a pain...

oldskoolte72's ae72

Who is online